Parametric Architecture & Facade Design Studio | India
Parametric facade cladding cost compared by material AND city across India in 2026 — GRC, corten, copper-bronze, anodised, PVDF and timber-look HPL, with indicative Rs/sq ft ranges for Mumbai, Delhi NCR, Bangalore, Pune and Ahmedabad.
Facade Cladding Rate Card: Cost by City & Material Read More »
Five India showrooms specify five facade finishes. Corten costs ₹1,200-2,800/sq ft; anodised aluminium lasts 25-40+ years. Compare cost, climate fit.
Corten, Bronze, Aluminium Facade Finish: Showrooms India Read More »
Facade finish options in India compared across 5 real systems: reflectance from 8% to 65% LRV, cleaning intervals, and cost per sq ft by process.
Facade Finish Options India: 5 Metal Systems Compared Read More »
Glass balcony railings in India mist from PVB whitening at an unsealed edge, not dust. A 5mm weep gap at 300mm centres stops it for good.
Glass Balcony Railing Fogging: It’s The Seal, Not The Glass Read More »
Facade material pros and cons for Indian homes: timber, metal shingle, terracotta, ribbed metal and fin fields. One clear strength, one hard limit each.
Facade Material Pros and Cons: 5 Systems, 5 Limits (2026) Read More »
Your house elevation looks flat in dull light because depth needs sun. Buy sheen and contrast instead of 150 mm more projection. Five India concepts.
House Elevation Looks Flat in Dull Light: Sheen, Not Depth Read More »
A house elevation without painting is a design decision, not a material. 5 SOGA concepts, Rs 900-4,000 per sq ft, against Rs 105-300 of repaint.
House Elevation Without Painting: 5 Self-Finished Systems Read More »
6 sculptural facade concepts where the shape does real work – shading, screening, stiffening. Rates from Rs 850 to 3,200 per sq ft, India 2026.
Sculptural Facade Design: 6 Concepts Where Form Has a Job Read More »
ACP is a 4 mm plane, so its shadows are printed. The real ACP sheet alternative for elevation India is section: recess 110-540 mm, tilt 0-26 degrees.
ACP Sheet Alternative For Elevation India: Section Not Sheet Read More »
Facade panel wind load in India runs 0.86 to 1.41 kPa in the field and 3.1 kPa at a corner. IS 875 charges a smaller panel more per sq m, not less.
Facade Panel Wind Load India: Why Smaller Is Not Safer Read More »